НАШИ ТЕЛЕФОНЫ:
+375 44 4998122
+375 29 5051299
+375 29 6740164
Категории

Страйкбольный автомат SA-A27-M ONE™ carbine replica - black [SPECNA ARMS]

Модель: SA-A27-M ONE™ carbine replica - black [SPECNA ARMS]
Наличие:
Нет
Цена: 0руб.00коп.
В рассрочку: 0руб.00коп.

Страйкбольный автомат SA-A27-M ONE™ carbine replica - black [SPECNA ARMS]

 

SA-A27 carbine replica by Specna Arms is made largely from a uniform zinc and aluminum alloy, reinforced with steel elements in the most vulnerable points of the replica (steel elements - all the screws, pins and tactical sling swivels). The stock and the pistol grip were made from polymer. The receiver of the replica and RIS handguard have undergone the process of anodizing,which guarantees a high degree of protection against corrosion. The paint was applied via a process of powder coating, after having the surface undergo the process of sandblasting prior to the application of paint. This provides a much higher than usual resistance of the applied paint to abrasion. The receiver bears USMC markings.

The replica’s parts are very well aligned - in a way that could be thus far noticed solely in replicas by such top-tier manufacturers as G&P or Classic Army, the replica is also perfectly balanced. This allows for an almost ideal maneuverability of the replica and its weight is almost unnoticeable once the replica has been shouldered. 

The replica features a quick spring change system, so-called Enter & Convert™. Due to that system, it is possible to rapidly and quickly adapt the power of the replica to the conditions expected on the playing field without the necessity to have access to a workshop or a set of special tools - once the gearbox has been taken out of the replica’s body, the process of spring change lasts literally seconds.

The advantages of Enter & Convert™ system are hard to overstate. In the light of the current tendency in the whole Europe to use legal limitations regarding the muzzle velocity of replicas or internal regulations inside various groups, the system guarantees the User a varied set of possibilities and plenty of freedom. Enter & Convert™ system allows with a minimal amount of time to exchange the main spring, thus to customize the muzzle velocity towards the area of the game in such a way so as to guarantee an ideal compromise between the effectiveness of fire and safety for the User himself as well as other participants.

The replica is fully compatible with LiPo and LiFe batteries. Due to the base muzzle velocity of ~410 FPS provided by the main spring installed by default by the manufacturer, the replica is perfect for operating on a medium range. The set also includes an M90 springwhich allows to reduce the muzzle velocity to ~310 FPS and as a result to adapt the replica for close-ranged and indoor operations.

A reinforced at the cylinder level gearbox contains a steel spring guide that is an element of Enter & Convert™ system and mounted on 8 mm ball bearings and caps steel gears. The system is secured with four anti-reversal latches. A light, made of polycarbonate polymer, piston is equipped with a steel tooth in order to increase its durability. Also implemented were a type 2 cylinder and a steel circuit-breaker, as well as a metal Hop-Up chamber.

The upgraded version features an array of new, reinforced parts such as:

- set of reinforced, steel gears
- steel spring guide
- lightweight, polymer piston
- aluminum air-sealed piston head
- metal cylinder head
- air-sealed, metal nozzle

The replica is equipped with a top RIS 22 mm rail, MLOK handguard and an SF stock. The rail features three short RIS rails. The top RIS rail features flip-up iron sights, which can be freely detached in order to make room for the attachment of a chosen optoelectronic aiming device. Due to the extendable stock with an anti-slip stock pad it is possible to adapt the replica’s length to the body type and preferences of the user. The custom flash hider is based on a 14 mm left-handed thread, which allows the attachment of a silencer in its place.

In order to enhance the realism of the game, the replica also features an operational bolt-catch mechanism.

The replica comes with a steel, 300 BB, Hi-Cap magazine. 

Specna Arms replicas are compatible with many magazines available on the market, from manufacturers like:
 - BOYI,
 - Airsoft Systems,
 - SRC,
 - King Arms,
 - MAG, 
 - STAR,
 - ACM.

Additional accessories visible in the photographs are not part of the set!

The set does not include a battery or a charger.

The set includes:

- replica
- magazine 
- fixed iron sights
- additional main spring

ATTENTION: 

According to report number HKGEC1600157401, the product meets the requirements of European Union RoHS - Restriction of Hazardous Substances 2011/65/EU directive annex II that amends the 2002/95/EC 
concerning the limitation of dangerous substances in electronics.

Which means that Specna Arms free from harmful materials such as:
- lead
- mercury
- cadmium
- hexavalent chromium
- polybrominated biphenyl (PBB)
- polybrominated diphenyl ether (PBDE)

Написать отзыв

Ваше Имя:


Ваш отзыв: Внимание: HTML не поддерживается! Используйте обычный текст.

Оценка: Плохо            Хорошо

Введите код, указанный на картинке:




  • Strike.by первый airsoft магазин в Беларуси © 2024
  • ИП Крутенёв Сергей Владимирович
    УНП:191510188 Свидетельство о государственной регистрации №191510188

  • Разработка сайта "Webunit"